mal
/
co2ampel
forked from smash/co2ampel
2
1
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

switched from neopixelbus to fastled; harmonized indentation in whole file

This commit is contained in:
Stefan Heinrichsen 2020-11-07 20:54:59 +01:00
parent 15d108760a
commit 2a231b27c0
1 changed files with 130 additions and 129 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

67
co2sensor.yaml
View File

@ -1,33 +1,36 @@
substitutions:
node_name: !env_var co2ampel
esphome:
name: co2ampel_${node_name}
name: 'co2ampel_${node_name}'
platform: ESP32
board: esp32doit-devkit-v1
on_boot:
- display.page.show: boot
on_loop:
- display.page.show: co2
ota:
safe_mode: True
safe_mode: true
password: !secret ota_passwd
logger:
level: DEBUG
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_passwd
ap:
ssid: "co2ampel"
password: ""
captive_portal:
ssid: co2ampel
password: ''
captive_portal: null
mqtt:
broker: co2.cyber23.de
topic_prefix: co2ampel/${node_name}
topic_prefix: 'co2ampel/${node_name}'
birth_message:
topic: co2ampel/${node_name}/status
topic: 'co2ampel/${node_name}/status'
payload: online
will_message:
topic: co2ampel/${node_name}/status
topic: 'co2ampel/${node_name}/status'
payload: offline
uart:
@ -37,11 +40,14 @@ uart:
id: uart_mhz19
light:
- platform: neopixelbus
- platform: fastled_clockless
chipset: WS2812B
pin: GPIO4
num_leds: 12
name: "ws2812 ring"
id: "ws2812"
max_refresh_rate: 500ms
rgb_order: GRB
name: ws2812 ring
id: ws2812
restore_mode: ALWAYS_OFF
output:
@ -55,10 +61,10 @@ sensor:
automatic_baseline_calibration: true
uart_id: uart_mhz19
temperature:
name: ${node_name} Temperature
name: '${node_name} Temperature'
id: mhz19_temp
co2:
name: ${node_name} PPM
name: '${node_name} PPM'
id: mhz19_co2
on_value:
then:
@ -69,8 +75,12 @@ sensor:
above: 0
below: 800
then:
- light.turn_off:
- light.turn_on:
id: ws2812
brightness: 80%
red: 0%
green: 100%
blue: 0%
- display.page.show: co2
else:
if:
@ -84,7 +94,7 @@ sensor:
id: ws2812
brightness: 80%
red: 50%
green: 50%
green: 40%
blue: 0%
- display.page.show: co2
else:
@ -100,15 +110,6 @@ sensor:
red: 100%
green: 0%
blue: 0%
# - output.turn_on: buzzer
# - output.ledc.set_frequency:
# id: buzzer
# frequency: "5000Hz"
# - output.set_level:
# id: buzzer
# level: "20%"
# - delay: 10ms
# - output.turn_off: buzzer
- delay: 500ms
- light.toggle: ws2812
- delay: 500ms
@ -117,7 +118,7 @@ sensor:
- light.toggle: ws2812
- delay: 500ms
- light.toggle: ws2812
- lambda: |-
- lambda: >-
static int num_executions = 0;
ESP_LOGD("main", "I am at execution number %d", num_executions);
num_executions += 1;
@ -127,14 +128,14 @@ i2c:
scl: GPIO22
font:
- file: "font.ttf"
- file: font.ttf
id: cust_font
size: 70
size: 65
display:
- platform: ssd1306_i2c
model: "SSD1306 128x64"
address: 0x3C
model: SSD1306 128x64
address: 60
brightness: 100%
update_interval: 10s
pages:
@ -144,7 +145,7 @@ display:
- id: co2
lambda: |-
int ergb;
ergb = id(mhz19_co2).state/100;
ergb = id(mhz19_co2).state;
it.printf(64, 0, id(cust_font), COLOR_ON, TextAlign::TOP_CENTER, "%.0i", ergb);
# it.printf(64, 16, id(cust_font), COLOR_ON,TextAlign::TOP_CENTER, "%.0fPPM", id(mhz19_co2).state);
# it.printf(64, 40, id(cust_font),TextAlign::TOP_CENTER,"%.0f°C", id(mhz19_temp).state);