Removed Arduino code
This commit is contained in:
parent
583d47fcc2
commit
98973811c8
|
|
@ -1,160 +0,0 @@
|
|||
#include <ESP8266WiFi.h>
|
||||
|
||||
#include <NeoPixelBus.h>
|
||||
#include <NeoPixelSegmentBus.h>
|
||||
#include <NeoPixelAnimator.h>
|
||||
#include <NeoPixelBrightnessBus.h>
|
||||
|
||||
#include <MQTTPubSubClient.h>
|
||||
|
||||
#include "config.h"
|
||||
|
||||
// Only for ESP8266 D1 Mini
|
||||
#define ECHO 5 // D1
|
||||
#define TRIG 16 // D0
|
||||
#define POTI_IN 17 // A0, analog In
|
||||
|
||||
WiFiClient client;
|
||||
MQTTPubSubClient mqtt;
|
||||
|
||||
// Set Data pin for LED ring (we use GPIO3, which is also RX of the serial line)
|
||||
#define DATA_PIN 3
|
||||
const uint16_t PixelCount = 8;
|
||||
NeoPixelBus<NeoGrbFeature, Neo800KbpsMethod > strip(PixelCount, DATA_PIN);
|
||||
|
||||
long duration; // here we measure the time needed by the ultrasonic pulse
|
||||
float distance; // the calculated distance
|
||||
|
||||
int poti; // used to adjust the distance for yellow/red
|
||||
int percent=0; // will be used to calculate the current percentage of the distance reached
|
||||
|
||||
int colorSaturation=255; // max color saturation for the colors (=brightness)
|
||||
|
||||
// define some colors we use later
|
||||
RgbColor red(colorSaturation, 0, 0);
|
||||
RgbColor green(0, colorSaturation, 0);
|
||||
RgbColor yellow(colorSaturation, colorSaturation, 0);
|
||||
RgbColor blue(0, 0, colorSaturation);
|
||||
RgbColor white(colorSaturation);
|
||||
RgbColor black(0);
|
||||
|
||||
|
||||
|
||||
void callback(char* topic, byte* payload, unsigned int length) {
|
||||
Serial.print("Message arrived [");
|
||||
Serial.print(topic);
|
||||
Serial.print("] ");
|
||||
for (int i = 0; i < length; i++) {
|
||||
Serial.print((char)payload[i]);
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
// Switch on the LED if an 1 was received as first character
|
||||
if ((char)payload[0] == '1') {
|
||||
digitalWrite(BUILTIN_LED, LOW); // Turn the LED on (Note that LOW is the voltage level
|
||||
// but actually the LED is on; this is because
|
||||
// it is acive low on the ESP-01)
|
||||
} else {
|
||||
digitalWrite(BUILTIN_LED, HIGH); // Turn the LED off by making the voltage HIGH
|
||||
}
|
||||
}
|
||||
|
||||
void setup() {
|
||||
// Important to first initilizate Serial before the strip as
|
||||
// we are useing the RX PIN to connect the strip
|
||||
Serial.begin(115200); // Baudrate: 115200
|
||||
|
||||
// start your network
|
||||
WiFi.mode(WIFI_STA);
|
||||
WiFi.begin(wifi_ssid, wifi_password);
|
||||
|
||||
while (WiFi.status() != WL_CONNECTED) {
|
||||
delay(500);
|
||||
Serial.print(".");
|
||||
}
|
||||
|
||||
randomSeed(micros());
|
||||
|
||||
Serial.println(""); Serial.println("WiFi connected");
|
||||
Serial.println("IP address: "); Serial.println(WiFi.localIP());
|
||||
|
||||
// connect to host
|
||||
client.connect(mqtt_server, 1883);
|
||||
// initialize mqtt client
|
||||
mqtt.begin(client);
|
||||
// connect to mqtt broker
|
||||
mqtt.connect("arduino", "public", "public");
|
||||
|
||||
// subscribe topic and callback which is called when /hello has come
|
||||
mqtt.subscribe(mqtt_topic, [](const String& payload, const size_t size) {
|
||||
Serial.print(mqtt_topic); Serial.println(payload);
|
||||
});
|
||||
|
||||
// Setup the ultrasonic sensor PIN
|
||||
pinMode(TRIG, OUTPUT); // TRIG-Pin: Output
|
||||
pinMode(ECHO, INPUT); // ECHO-Pin: Input
|
||||
|
||||
// this resets all the neopixels to an off state
|
||||
strip.Begin();
|
||||
for(int i=0; i<PixelCount; i++) {strip.SetPixelColor(i, red);}
|
||||
strip.Show();
|
||||
|
||||
}
|
||||
|
||||
void setColor(RgbColor c) {
|
||||
for(int i=0; i<PixelCount; i++) {
|
||||
strip.SetPixelColor(i, c);
|
||||
}
|
||||
strip.Show();
|
||||
}
|
||||
|
||||
void setRed() {
|
||||
setColor(red);
|
||||
}
|
||||
|
||||
void setYellow() {
|
||||
setColor(yellow);
|
||||
}
|
||||
|
||||
void setGreen() {
|
||||
setColor(green);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
|
||||
// Read poti (Value range 16 - 1024)
|
||||
poti=analogRead(POTI_IN);
|
||||
|
||||
// Measure Distance
|
||||
digitalWrite(TRIG, LOW); delayMicroseconds(2);
|
||||
|
||||
// TRIG-Pin ist HIGH für 10 Microsekunden
|
||||
digitalWrite(TRIG, HIGH);
|
||||
delayMicroseconds(10);
|
||||
digitalWrite(TRIG, LOW);
|
||||
|
||||
// Liest das ECHO aus und speichert die Zeit von Senden / Empfangen in Microsekunden
|
||||
duration = pulseIn(ECHO, HIGH);
|
||||
|
||||
// Berechnung der Entfernung
|
||||
// Da der Weg doppel ist: Hinweg - Rückweg, muss der Wert durch 2 geteilt werden
|
||||
distance = duration * 0.034 / 2;
|
||||
|
||||
// Set color depending on poti
|
||||
// We assume poti value/20 (resulting in range <1,5 cm - 100cm)
|
||||
// Green if we are more than 50% above goal, yellow below 50% of goal, red at or below goal
|
||||
|
||||
percent=distance/((float)poti/10)*100;
|
||||
|
||||
if (percent >150) { setGreen(); }
|
||||
else if (percent >100) { setYellow(); }
|
||||
else {setRed(); }
|
||||
|
||||
// Anzeige der Entfernung im seriellen Monitor
|
||||
Serial.println("Poti: " + String(poti));
|
||||
Serial.println("Entfernung: " + String(distance) + "cm");
|
||||
Serial.println("Percent: " + String(percent) + " of goal value");
|
||||
delay(1000);
|
||||
|
||||
}
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
char* wifi_ssid = "your-ssid";
|
||||
char* wifi_password = "your-passwd";
|
||||
const char* mqtt_server = "your.mqtt.broker.org";
|
||||
const char* mqtt_topic = "/your/topic/to/listen/to";
|
||||
Loading…
Reference in New Issue